Black FIA Spacer fabric Trimmed Super Sport B Single Skin Seat Rear FIA 8855-1999 Approved.Universal fitment 288mm side hole centresBare shell weight 3.7Kgs, Fully Trimmed weight 5.4Kgs

Carbon Radiator-Panel-SurroundDelivered as factory spec in plain plastic or now painted (Lotus Interior Color Pack). We offer you a visually sportier solution in carbon!Note: All carbon parts are available with a clear or matt finish. Unless otherwise stated, we supply parts with a glossy clearcoat finish. Our carbon parts are parts of small batch production! In some cases minor adjustments may be necessary.

Carbon Radiopanel + Vents for Elise/Exige Modelyear MY2008 onwards (with Airbag).Radio and Vents are not included.

Sidescoops in Carbon to replace your GRP-Factory Version! They fit for all Exige V6. Scope of delivery: 2x Carbon Side Scoops with thin clear coat  Grilles are not included in the scope of delivery! Carbon Side Scoops are also without integrated GRP housing.Grills also need to be adjusted.Attention: All carbon parts are available with a clear coat finish in matte or glossy. If not otherwise specified, we provide parts with a glossy clear coat finish. Our carbon parts are produced in small series! In individual cases, minor adjustments may be necessary.

Enhance your Exige V6 with this carbon fiber diffuser frame.Note: Our carbon parts are produced in small series! In individual cases, adjustment work may be necessary. All carbon parts come with a glossy finish. Depending on the batch, there may be different "clear coat color tones."Parts in a matte finish can be produced upon explicit customer request but may vary in delivery time and incur an additional cost. If you have any questions regarding this, our team is at your disposal.[Volumetric weight=shipping calculation]

Carbon A-Panels "KT-Track"we deliver a Set (LH and RH), raw/unpainted. Wider Panel incl. grills and holes for indicator.Really good fitment, made in Germany.You should use them painted in car colour mainbody and keep the middle part in gloss-transparent finish (see picture 2 and 4 - extra costs!). More informations follow soon.

This high-quality carbon seat is delivered without padding. Cushions in different colored alcantara can be delivered additionally. (item-no.1210-011)For use in a VX220 (Speedster) you will require additional brackets.More details can be found in the attached PDF file.

Carbon front splitter V6 "KT-Track" Aerodynamics development from a road car to a race car. The optimal way to optimize your Lotus Exige V6 (MY12-21) aerodynamically and optically. The focus was on a striking increase in the efficiency of the downforce on the front axle. Our new "KT-Track carbon front splitter". Highest quality - Made in Germany! A front splitter ensures a guided air flow at the front of the vehicle to improve road grip. The lift force is reduced by the resulting negative pressure on the underbody and, especially at high speeds, the vehicle is additionally stabilized and the steering behavior is improved. (Downforce) There are basically two ways to achieve the effect of improved downforce on the front axle. You can either extend the splitter to the front in order to apply an increased force on the top, or through the optimized air flow on the bottom.Lengthening the splitter is technically only possible to a limited extent with the Exige, as it would otherwise constantly touch the road and there is a risk of damage (including ramp angles).On our version, we also used skid plates known from motorsport. These small metal blocks protect the high-quality component from damage and can be replaced when worn. Our splitter replaces the original front splitter and the aluminum underbody plate attached behind it. This enables us to shape the splitter in an aerodynamically optimal way, that is, the splitter rakes by 4.5 ° and thus creates negative pressure, i.e. downforce, just like the diffuser at the rear. The integrated diffusers on the left and right generate additional negative pressure and a vortex. The two air ducts in the middle are intended for optional ventilation of the brake and can be used on request. This ensures a reduction in the thermal load on the front brake components. The performance, especially when using the track, is significantly improved. We have developed the top wheel arch ventilation (item number 2311-001) and the ventilation through the wheel arch / fender panel (item number 2311-002) so that the air fed into the wheel arches can flow out cleanly (parts have to be ordered separately). Both products are made of carbon using the autoclave process. All three components can also be used individually. However, the optimal aerodynamic effect is only achieved when they are used together. The air flow exiting at the top is placed over the front of the vehicle and thus generates additional contact pressure and improves the flow towards the rear wing. On the side of the front splitter, we have added higher fins in the design that serve as a vortex generator to better guide the air around the vehicle and thus additionally support the aerodynamics by reducing air vortices in the wheel arch. A measure that is very effective and hardly has a negative impact on the vehicle's drag coefficient. The overhang to the front clip is about 8cm on the front-side and about 5cm in the front-middle. Thus, the ramp angle of the Exige is only slightly influenced. The side fins are about 16cm high. The overall component has a size of about 175x75x25cm and is therefore only possible for shipping as bulky goods and within the EU! Motorsport part without street approval.

Alcantara seat upholstery for Mulsane C seat, self-adhesive. Various colors available.Price per set for one seat, the seat shown is not included in the price.

The new KT-Track rear wing for the Lotus Exige V6 Developed in the wind tunnel, our new KT-Track rear wing offers an optimal profile to generate a very good ratio of downrforce and air resistance. The 1.350 mm wide, curved wing ensures a balanced aerodynamic distribution, especially in combination with the motorsports front splitter. At an angle of 12° of the tail wing, the highest aerodynamic system efficiency is achieved.The output on the rear axle is 50.2 kg at 160 km/h and 122 kg at 250 km/h.The wing is fixed to the tailgate by aspecially build Komo-Tec wing supports which can withstand the additional load without any issues. If the car has fitted the Carbon-Enginehodd as a standard spec you will have to rework the Uprights locally. As a standard, we supply these supports in black. Special colors such as silver or gold for example can be supplied on request. Optional:a) Curved (pictures 1-6)b) Flat (pictures 7-12)c) Matt Finishd) gloss Finish You can get some more informations about the Rear Spoiler in our Technical Blog over here: Mira Windtunnel Test BlogThe part is fixed at the original fitting points. Motorsportpart - Track use only - NO street use StVO/StVZO!An individual approval by TÜV-germany is possible at our dealership.Partproduction "Made in Germany". Only fits to cars with factory-spec Glas/GRP-hood. It is possible to fit at the Carbon-Hood too, but needs to be reworked at the car directly. (volume weight - only for calculation of shipping costs)

Carbon centre tunnel for cars with open gear-gate to replace the standard item, Carbon gloss finish.Only for LHD-cars available. Attention: NOT to use to modify cars with factory-spec closed tunnel!

Carbon side skirts for Exige V6 modelsBuilt in carbon fiber with a glossy finish, these side skirts are a great fit for any Exige V6 model. The progression and the beading are based on the vehicle silhouette and are therefore made considerably better than the "boards" that are otherwise available. We deliver a set of sideskirts. A set of screws can be put together on request.   Note: Ourcarbon parts are parts from small series production! In individual cases, minor adjustments may be necessary. All carbon parts are available with a clear lacquer finish in matt or glossy. Depending on the batch, there may be different clearcoat colors. Parts with a glossy finish are usually in stock, parts with a matt finish are only manufactured at the explicit request of the customer and vary accordingly in the delivery time. If you have any questions, our team will be happy to assist. [Volumeweight for Shipping costs]  

Eltech Side-Sillpanels in Carbon or GRPSimular to the Exige Sport 380 Factory Spec we offer you a Set of Aero-Side-Sills to optimize Airflow.   We can deliver the following options: Material: GFK/GRP in matt-black or Carbon with glossy or matt Finish (if not specified separately we deliver the gloss-version). Fitting : by Stay-Tailgate (we recommend this!) or Gas-Spring-Dampers (can get to different gaps!) Suitable for: Lotus Exige S V6 and Exige Sport 350/380/410/430.   We deliver a set of one LH- and one RH-Panel! Motorsportpart - Track use only! Volume-Weight! Sills-Weigth approx. 3kgs

Carbon Motorsport Mirror-Set it is a one-pice-Mirror-Kit including mounting, housing and mirror-glas!The mounting is approx. 14cm tall and mirrorglas-size about 15x8cm, oval, weight 180gr./Mirror.(for comparison: Factory-Spec Mounting Elise approx. 14,5cm, Exige V6 approx.. 17,5cm, Mirrorglas ca. 15x9cm, rectangular). Motorsportpart - Track use only - NO street use StVO/StVZO!Attention: The interior mirror surface (i.e. the part where the glass sits in) is not additionally coated or provided with a complete finish. Here the carbon structure can be seen in the manufacturing process. This is not a visual defect, but the way these mirrors are produced! [Shippingweight = Volumeweight]  

Pair Cover mirrors, carbon fiber, glossy for all models. Price per pair.

Carbon-Aero-Frontflaps Generates increased pressure and traction at the front axle. We deliver a set of carbon flaps. The following variants are available: - Track (small size) - Race (tall size) - complete set (Track + Race) Flaps fit to Lotus Exige S V6 / Sport 350 / Sport 380 up to MY2018. For Facelift-Cars your will have to do some rework and/or to change position. Motorsportpart - Track use only - NO street use StVO/StVZO!</p>

Upper carbon wheel arch ventilation "KT-Track" The KT-Track wheel arch ventilation A lot of air resistance is generated in a relatively small area in the Exige's wheel arch. To counteract this, openings in the clam are used for "ventilation". These reduce the resulting air pressure and thus also the resistance in the wheel arch. The lift of the wheel house is now minimized by the changed pressure conditions and the resulting air flow also ensures improved cooling of the brake system. The wheel arch ventilation is part of our three-stage "KT-Track" aerodynamic development. The other two components are the carbon front splitter (item number 2211-018) and the Carbon A-Panels / fenders (item number 2311-002). These components can also be used individually (available separately in the shop). The optimal aerodynamic effect, however, results only when used together. The air flow exiting at the top is then placed over the front of the vehicle and thus generates further contact pressure and improves the airflow towards the rear wing. The carbon grids are manufactured using the autoclave process. We supply a set of wheel arch vents (part dimensions approx. 51x16cm per side), as well as a wrap-negative to stick on for easy positioning to ensure the grid. To do this, a cutout must be made on the clam (irreversible!), and then the grille will be attached and glued from above. A wide edge of the carbon parts offers enough space and enables a visually appealing solution without repainting. Motorsport part without street approval.

High quality carbon hardtop which fits for Elise, Exige and Exige V6, as a replacement for the original roof insert. The carbon layer is flat not "V-style" as factory-spec! Weight: 5,6 kg, weight original part: 11 kg (GRP). *New* V-Style Carbon good to use in combination with Lotus-Factory-Spec! Attention: If you have got a Cup-Car we need some special fittings! Please send us a mail so that we can send you the right ones (additional costs approx. 60€). If you order the Seals or Fittings we deliver them as spare parts! If we shall do a pre-fixing please note by order or send us a mail via contact-formular (additonal costs).

Carbon Aero Front Floor under Wishbone Infil PanelThis plates help for ground-effect at the front axle.It closes the space at the wishbone to allow a better airflow.We deliver 1x left-hand and 1x right-hand part.