Lotus Track Exhaust (“quiet”) Specially designed for track use and today's volume limits at Trackdays, this rear muffler is "tuned to quiet". The exhaust gives a weight saving of apporx. 3Kg over the standard silencer (=13,4 kg) and is noise reduced to make it more compliant for track use. Note: Thisis a non-active silencer, so, the exhaust valve override button (if fitted) will no longer operate. Factory specifications: Stationary: 72.5dB * (99.5dB at 5,250 revs) * In driving: 76.5 dB at 3,000 revs * 84.6 dB at 5,000 revs * 87.3 dB at 6,000 revs * 86.65 dB at 6,800 revs * *Please Note: The “track use only” exhaust should in most cases be suitable to use on UK circuits which have a static noise regulation of 105dB(A) and a dynamic noise regulation of 92 dB(A). Silencer dB(A) levels can also vary depending on how they are used and bed in from new. Suitable for: Exige Sport 380, Cup 380, Sport 410 and Cup 430, as well as Evora 400, Sport 410, GT410, GT430!Not for US-federal cars!   Motorsport Part - Without street legal! Track use only! [Weight specification: volumetric weight for shipping cost calculation]

High quality Komo-Tec stainless steel Track-Exhaust *low noise* for Exige / Evora V6Specially developed for use on the race track and today's volume restrictions on track days, this rear silencer is trimmed to be "quiet". This is achieved by an additional pre-silencer. Nevertheless, it still convinces (within of its possibilities) with a sporty and robust sound. A valve control is not used, although we have technically ensured that the exhaust back-pressure also harmonizes in combination with our performance increases. The rear silencer is available for the both of the factory pipe diameters (variants: "up to 280/350PS" and from "380PS or upper") and can be installed without any conversion. In addition, we were able to save on the weight of the factory component.Weight comparison:Lotus original rear silencer: 15.9 kg Lotus Track rear silencer: 13.4 kg KT * low-noise * track rear silencer: 11.3 kg Motorsport part - not street legal! Not permitted in the area of ​​the StVO / StVZO! [Weight specification: volumetric weight for shipping cost calculation]

High Quality stainless steel switchable exhaust silencer for Exige V6/ Evora with 70mm primary tube diameter. Our silencer achieves a sporty and crisp sound and less weight than the original. The overall aim was to create a sports silencer which achieved three targets: less weight than standard (15.9kg standard/13.2kg Komo-Tec)significant difference in sound between open and closed exhaust flap. After long development and different prototypes we managed thisNo power loss between open/closed exhaust flap. During testing on the dyno we found that some products on the market have significant differences in power output with the flap in the open or closed position. Our system produces the same power whether the valve is open OR closed.The silencer is a direct 1-to-1 replacement for the original/standard part. The original switch control for the exhaust continues to work as normal. The tailpipes have a diameter of 85mm and a perforated inner tube. Motorsportpart - Track use only - NO street use StVO/StVZO! ATTENTION: For cars with factory-valve-exhaust (or Sport Pack) only![Weight specification: volumetric weight for shipping cost calculation]

Stainless Steel Y-Pipe incl. HJS-Catalyst for Exige Sport & Cup 380, Sport 410 or Cup 430. The Y-Downpipe is made of stainless steel and can be exchanged to the OEM part. By the use of a bigger sized diameter (76mm) it provides a better performance. Additionally we use a Flexpipe to lower the forces at high strength of the complete system. Our Sports catalyst is a high quality replacement for the original Lotus part. Developed by HJS Motorsport, our catalysts provides a more optimal flow and the number of cells is reduced to 200cpi for best performance. Note: This part replaces the downpipe from the manifolds to the silencer! So it doesn’t make sense to buy it seperately, because at factory spec the cat is placed in the manifolds. This part is only possible in conjunction with our sports-manifolds! Motorsportpart - Track use only - NO street use StVO/StVZO! (Volumeweight)

Too loud for the track? The solution: KT-Track dB-Eater-Insert! Easy installation, with tailpipe direction to the left or right, the loudness are reduced by about 3dB. Depending on the track or measuring points to use. Motorsportpart - Track use only - NO street use StVO/StVZO! Not for cars with Titan-Muffler and Exige S V6 / Sport 350 with a two-hole tip!

Exhaust flap control via remote controlMany Lotus models are now equipped with a flap rear silencer from the factory. Especially with the latest models, the flap is controlled solely by the ECU and only opens at around 4,500-5,000 rpm depending on the model and driving modes to meet noise emission standards. Furthermore, the valve is opened under high load to protect the engine and reduce exhaust back pressure.Our electronic flap control operates completely independently of the control unit and allows you to keep the flap permanently open or closed!Control is via remote control transmitter (Smartlink).Note: We expressly advise against driving at full load with the flap closed when using the standard rear silencer due to the pipe diameters to prevent engine damage! However, using the Komo-Tec rear silencer with the exhaust flap closed under full load is advantageous due to identical pipe diameters (closed/open) without disadvantages!Applicable for:Lotus Evora and Evora S (with factory flap rear silencer),Lotus Evora 400, Sport 410, GT410, GT430Lotus Exige S V6, Sport 350, Sport 380, Sport 410, Cup 430Lotus Elise from 2004 with Komo-Tec flap rear silencer (work in progress)Motorsport part - Not approved for road use! Not permitted in the area of the StVO/StVZO!

Original Lotus Exhaust Mounting Price per piece Suitable for: all Evora, Exige V6, 311