Driving lamp Elise Mk2, 80mm, oval price per Item Suitable for Elise / Exige MK2, up to MY11 if factory-fitted

Plug&Play Display System for all Elise/Exige/211/Speedster models from 1996 onwards To offer a cost-effective solution for owners of older Elise and Exige models, we have developed our new display system, which utilizes an Ecumaster ADU5 Display (5"). With our mounting kit, it provides a simple plug-and-play solution. Only the original display needs to be removed and replaced with the new ADU5 using suitable adapter plugs and installation kit. The display boasts brilliant resolution, good readability, and complete configurability with multiple display pages that can be freely customized. Upon delivery, a basic configuration for Elise and Exige is preloaded. In its basic version, the display can show everything sent over the factory Lotus Can Bus data:including RPMwater temperaturespeedall warning lightsfuel gaugeboost pressureAdditional features without expansion include:programmable shift lights data recording via USB stickAdditional sensors such as oil pressure and oil temperature can be integrated by installing the corresponding sensor. For lap timing display and analysis, the "GPS module" must be installed. To undertake custom programming, the "USB to Can" adapter must be ordered separately.

The new taillight set from Komo-Tec, featuring high-quality LED components, can be easily installed with our custom-made bracket. It looks modern with its clear glass optics and provides a real alternative to the stock lights. In combination with additional reflectors and the provided E-certification mark, unlike many US and CN products, no registration is even necessary!Suitable variants:a) 4x taillight set for Lotus Elise Mk2 (MY2001-2011) and Mk3 up to MY17.5, as well as Exige S V6 / Sport 350, 2-Elevenb) 2x taillight set for Lotus Elise Mk3 from MY17.5 onwards, as well as Exige Sport 380/410/430, Evora, 3-Eleven

AIM MXP (Strada) Displays for Elise / Exige Note: The respective price information already includes the necessary assembly costs and the sensors required for the basic setup! The AiM MXP 1.3 is a free configurable 6“ TFT-display with integrated data recording. It has 5 configurable RGB alarm-LED’s, 10 configurable RGB shift-lights, WiFi-connection, three CAN connections und two of them to receive data from over 2000 ECUs of the industry-leading ECU manufacturers. In the Strada version, the display comes without a G-meter, without memory and fewer interfaces (see excerpt from the table). All this is housed in a waterproof aluminium case with new sealed aluminium side-mounted buttons for quick and easy interaction without the need for a PC.   Version: MXP Race MXP Strada* Display: 6" TFT-Display 6" TFT-Display CAN-Connections: 3 3 Analog-Inputs: 8 8 Digital-Inputs: 4speed 1rpm 1speed 1rpm Internal Memory: 4 GB - G-Mesuarment: triaxial +/-5G - Alarm-LEDs: 5 RGB 5 RGB Shift-LEDs: 10 RGB 10 RGB Weight/Size: 640g 189,6x106,4x24,9mm 590g 189,6x106,4x24,9mm *Necessary for street approval due to existing icons to achieve individual acceptance Optionally available: AIM SmartyCam 3 GP including holding kit! The new SmartyCam 3 GP is the ultimate full HD motorsport camera with finger camera and integrated ECU interface. This version is the new GP version of the SmartyCam 3 range and is designed for all racers who want to get the most out of every performance video on the track.This camera enables recordings in H.264 quality (1920x1080 pixels @60fps) and can be equipped with SD memory cards of up to 2TB (not included). 1 hour recording requires approx. 5 GB of storage space at the highest quality setting. With the “Data Overlay” activated, the film material can display the determined parameters. The camera's diagonal field of view allows shots at 67° or 84° or 120°.   Vehicles before model year 2004 - price on request!

GPS to can Module V2 Ecumaster Emu Black ProThe Ecumaster GPS-CAN module provides highly accurate position tracking with an update rate of 20 Hz.The module can use GPS, Glonass and Galileo satellites with the included external active antenna.Thanks to an integrated 3-axis accelerometer and gyroscope, the device can provide information on speed, position, orientation and altitude.All GPS data is transmitted via the CAN bus.The GPS module is designed to work with the ADU display/logger and enables real-time lap times, predicted lap times as well as offline track maps and data analysis.With this module, you can take your vehicle performance to a new level and get more accurate information for race training and vehicle optimization.

ECU Master USB to CAN The ECUMASTER USBtoCAN is a USB interface that allows the user to connect to the CANbus network. It supports the CAN 2.0A and CAN 2.0B. standards. It is equipped with an LED status diode for quick diagnostics and a 120 ohm terminator that can be switched on or off to relieve the user of the need to use external terminators.This device is used to communicate with the PMU-ADU & PRO-ECU.

52 mm stepper motor gauge, oil pressure 0-7 bar - Microprocessor-controlled stepper motor - 270 ° dial for superior readability - Maintenance-free LED backlight - Includes high-quality sensors.

52 mm stepper motor gauge, oil temperature 40-140 ° C • Microprocessor-controlled stepper motor • 270 ° dial for superior readability • Maintenance-free LED backlight • Includes high-quality sensors.

Indicator housing suitable for Elise Mk2 and Exige Mk2.Please specify if LH or RH is needed. (see selection)

LITE↯BLOX LB20XX smart lightweight battery (13Ah, 4-8 cylinder engine, 2500-4000ccm) Our versatile high performance starter battery LB20XX in a thermally & mechanically decoupled Carbon Fibre housing with implemented bracket, intelligent electronics with integrated, active kill-switch – engineered and built by hand in Germany. features saves 15-20kg (33-44lbs) to a standard OEM starter battery with 35-55Ah capacity plug’n’play replacement – fit for almost any production car wireless interface for wireless data monitoring via Smartphone App maintenance-free due to intelligent BMS-System (over-/undervoltage, over-/undertemperatur, overcurrent & short ciruit) innovative & smart electronics for kill-switch via Smartphone App in two different programs:1.) I.K.O.S. – Intelligent Kill-Operation-Switch:effective disconnection of the LITE↯BLOX from the vehicle due to overload or via Smartphone (emergency or extended sitting periods), similar to the common FIA kill-off switch2.) A.V.A.T. – Active Vehicle Anti Theft:while all consumers are still being provided with energy, the LITE↯BLOX will instantly shut down at any theft attempt latest premium cell technology (LithiumWerks ANR26650M1B V3) rapid charging (optimal für Start-Stopp) marginally self-drain when not in use (sitting time >200days) fail safe due to innvative concept and premium materials tested in professional motorsport & FIA approved for Formula3 F3 plus Motorsport-UK registered (11/LI/19) engineered & handcrafted in Germany with a 5 year extended material guarantee application 4-8 cylinder engines (2500-4000ccm***) daily driven car use with restrictions (vehicle parking periods 2-4 weeks*) sportscar / tracktool / motorsport (race track circuit / 24h race / endurance / dragracing / formula F3 / NASCAR) / tuning / Car-Hifi / boats for the use in applications with intelligent battery management (IBS / IAC) –> battery programming mandatory! for all vehicles from 2019 where the car battery can not be programmend to the ECU our special IBS-adapter is mandatory or the use in applications with regenerative brake system use our model LB28XX only for vehicles of the BMW F-series (type M3 / M4), the OEM battery cable of the BMW M2 must be used (IBS 61219117877) technical data weight: 20XXg / 4,4lbs** (24XXg incl. OEM-baseplate) dimensions: 202 x 123 x 100mm (l x b x h) voltage: 13,2V / 15,2V (nom / max) capacity: 13Ah / 35-55Ah (nom / Pb-eq) cranking current: 250A / 750A* (cont / peak @RT) temperature: -20 to +80°C lifespan: lifespan: 3-5x compared to the OEM battery* connection: OEM clamp onto the battery poles (DIN) or via ring terminal (M6) certificates: certificates: product complies with directives 2001/95/EG, 2011/65/EU, 2006/66/EG, 2008/104/EU delivery scope: LITE↯BLOX + aluminium pole terminals + mounting material For more Information: see downloads section     * depending on usage, setup, peripheral, etc. ** since every LITE↯BLOX is built by hand, there might be marginal deviations in these values

LITE↯BLOX LB12XX smart lightweight battery (7,8Ah, 2-4 cylinder engine, 1000-2500ccm) Our lightest high performance starter battery LB12XX in a thermally & mechanically decoupled Carbon Fibre housing with implemented bracket, intelligent electronics with integrated, active kill-switch – engineered and built by hand in Germany.  features saves 13-18kg (28-40lbs) to a standard OEM starter battery with 15-35Ah capacity plug’n’play replacement – fit for almost any production car wireless interface for wireless data monitoring via Smartphone App maintenance-free due to intelligent BMS-System (over-/undervoltage, over-/undertemperatur, overcurrent & short ciruit) innovative & smart electronics for kill-switch via Smartphone App in two different programs:1.) I.K.O.S. – Intelligent Kill-Operation-Switch:effective disconnection of the LITE↯BLOX from the vehicle due to overload or via Smartphone (emergency or extended sitting periods), similar to the common FIA kill-off switch2.) A.V.A.T. – Active Vehicle Anti Theft:while all consumers are still being provided with energy, the LITE↯BLOX will instantly shut down at any theft attempt latest premium cell technology (LithiumWerks ANR26650M1B V3) rapid charging (optimal für Start-Stopp) marginally self-drain when not in use (sitting time >150days) fail safe due to innvative concept and premium materials tested to extense in professional motorsport along with the FIA (Motorsport-UK registered 11/LI/19) engineered & handcrafted in Germany with a 5 year extended material guarantee application 2-4 cylinder engines (1000-2500ccm***) limited daily car use (vehicle parking periods 1-2 weeks*) sportscar / tracktool / motorsport (sprint / rallye / hillclimb / slalom / trackday / time attack / dragracing) / custom bike / tuning / car-hifi / drone / boats not for the use in applications with intelligent alternator control (IBS / IAC) – therefore use our larger models LB20XX / LB28XX technical data weight: 14XXg / 3,1lbs** (18XXg incl. OEM-baseplate) dimensions: 202 x 123 x 100mm (l x b x h) voltage: 13,2V / 15,2V (nom / max) capacity: 7,8Ah / 15-35Ah (nom / Pb-eq) cranking current: 150A / 450A* (cont / peak @RT) temperature: -20 to +80°C lifespan: 3-5x compared to the OEM battery* connection: OEM clamp onto the battery poles (DIN) or via ring terminal (M6) certificates: product complies with directives 2001/95/EG, 2011/65/EU, 2006/66/EG, 2008/104/EU delivery scope: LITE↯BLOX + aluminium pole terminals + mounting material+au More informations see Downloads Because of its limited power for daily usage we recommend for Elise Liteblox 2.0 also. * depending on usage, setup, peripheral, etc. ** since every LITE↯BLOX is built by hand, there might be marginal deviations in these values

Lite-Blox Lightweight Li-Accumulator 1.4 Generation 4 (7,5Ah, 2-6 Zyl., 1.-3.000ccm) Our lightest high performance starter battery LB14XX in a thermally & mechanically decoupled CFK housing with implemented bracket, intelligent electronics with integrated, active kill-switch – engineered and built by hand in Germany. features saves 13-18kg (28-40lbs) to a standard starter battery plug’n’play replacement – fit for hardly any production car wireless interface for wireless data monitoring via Smartphone App maintenance-free due to intelligent BMS-System (over-/undervoltage, over-/undertemperatur, overcurrent & short ciruit) innovative & smart electronics for kill-switch via Smartphone App in two different programs: 1.) I.K.O.S. – Intelligent Kill-Operation-Switch: effective disconnection of the LITE↯BLOX from the vehicle due to overload or via Smartphone (emergency or extended sitting periods), similar to the common FIA kill-off switch 2.) A.V.A.T. – Active Vehicle Anti Theft: while all consumers are still being provided with energy, the LITE↯BLOX will instantly shut down at any theft attempt latest premium cell technology (A123 ANR26650M1B V3) rapid charging (optimal für Start-Stopp) marginally self-drain when not in use (sitting time >150days) fail safe due to innvative concept and premium materials DMSB homologated (Lithium Ion battery RLB2016-27/17) tested in professional motorsport application 2-4 cylinder engines (1000-2500ccm***) limited daily car use (vehicle parking periods 1-2 weeks*) sportscar / tracktool / motorsport (sprint / rallye / hillclimb / slalom / trackday / time attack / dragracing) / custom bike / tuning / car-hifi / drone / boats not for the use in applications with intelligent alternator control (IBS / IAC) – therefore use our larger models LB20XX / LB28XX technical data weight: 14XXg / 3,1lbs** (excl. pole terminals) dimensions: 149 x 123 x 100mm (l x b x h) voltage: 13,2V / 15,2V (nom / max) capacity: 7,5Ah / 20-35Ah (nom / Pb-eq) cranking current: 150A / 450A* (cont / peak @RT) temperature: -20 to +80°C lifespan: 3-5x compared to the OEM battery* connection: OEM clamp onto the battery poles (DIN) or via ring terminal (M6) certificates: product complies with directives 2001/95/EG, 2011/65/EU, 2006/66/EG, 2008/104/EU delivery scope: LITE↯BLOX + aluminium pole terminals + pole caps + mounting materialX +aluminim pole terminals + pole caps + mounting material Because of its limited power for daily usage we recommend for Elise Liteblox 2.0 also.

LITE↯BLOX LB0150 charger – LiFePO4 LFP lithium – maintenance Safe, fast and gentle charging with automatic soft start function and 5-stage charging characteristic, specially tailored to our products for "plug'n'play" application. Suitable for commercially available 12V car starter batteries based on lead-acid (wet, AGM, gel), as well as lithium-based batteries (LiFePO4, LFP) with integrated battery management system (BMS).Features 5 years extended manufacturer warranty! Auto-wake up: Automatic waking of deeply discharged batteries with BMS Multi-stage charging phase: pre-charge, soft start and constant current phase Auto-Restart: after voltage drop Safe use: protection against short circuits, reverse polarity and overcharging Integrated live status query via smartphone app Technical Model: LB0150 Operating voltage: 230VAC (50/60Hz) Output current: 10A (± 10 %) Power: 150W (± 10 %) Housing: black plastic housing Operating temperature range: -40°C to +60°C Dimensions: 60 x 105 x 190 mm (lxwxh)Weight: 0.9kg IP protection class: IP65 Efficiency: 94% Scope of delivery: Charger with power plug (1.5m) & charging cable (1.5m) with pole terminals or ring cable lugs, operating instructions

Fitting Plate for Lite-Blox-Battery (1.4 or 2.0)