Clearance Sale:AP 308mm Replacement Friction Rings for Lotus BigBrake Kit with 2-Piece Brake Discs
If the rotors are worn (no slots left or cracks through the outer diameter) you have to replace it.Here in the article you can get all the available options of replacement rotors. We deliver a set for one axle (1x LH and 1x RH rotor incl. the fitting kit / bobbins. Normally you can continue with the alloy-pot that exists.
Hints:Please take car of the driving in periode to be sure that everything is running well and to avoid faiding!
Assembly requires technical knowledge!
Suitable for the following models:Elise Mk1, Exige Mk1, 340R, Elise Mk2 Rover, Mk2 Toyota, and Mk3 + Exige Mk2 + 211.The latest AP Racing anti-rattle plate for AP twin-pot calipers features an improved design, with an enlarged locating groove for the retaining pins. This enhancement provides a more secure hold, ensuring better alignment and improved centralization of the spring.These original equipment springs are specifically designed to reduce brake pad rattle and eliminate the "clonking" noise often heard when the vehicle moves forward at low speeds.Earlier versions had a tendency to slip, resulting in less effective pad retention.Each caliper kit includes:2 x New brake pad retaining pins1 x Anti-rattle plate2 x R-clipsNote: Two kits are required per car, 1x set for 1x caliper!
This comprehensive kit contains everything needed to fully refurbish the 2-pot front AP brake calipers.The kit includes:2 x AP pistons4 x Piston seals1 x New bleed valve2 x Pad retaining pins1 x Anti-rattle spring plate2 x R-clips4 x Anti-rattle brake pad buffersThe accompanying picture illustrates the location of these components.Optional: The crossover pipes shown in the image are available separately.Additional Notes:The kit for the MK1 Elise is slightly more expensive as it includes specially machined pistons with an integrated anti-knock-off spring. This feature is highlighted in the related products below.Later S2 calipers do not require this anti-knock-off function.Compatibility:S1 Kit: Fits MK1 Elise, Exige, and 340R.S2 Kit: Suitable for all S2 models, including the S2 Exige and Europa.Please note: One complete kit is required for each caliper.
Suitable for the following models:Elise Mk1, Exige Mk1, 340R, Elise Mk2 Rover, Mk2 Toyota, and Mk3 + Exige Mk2 + 211.Note: 1x set = both calipers (pins and springs)
Original Lotus „Fast Road brake-kit“fits for Elise and Exige with 4Zyl.-Toyota-Powertrain (for Rover-Powertrain depents on matching wheel-sizes).
The kit harmonises perfectly with the sporty character of the Elise and has already been used successfully in series production by Lotus in some special models or in the Exige S with performance package. By using the larger brake discs and calipers, the brakes can be better dosed, the braking effect is improved and the temperature remains in a more stable range.
The kit consists of two one-piece perforated brake discs (308 mm diameter), as well as a pair of AP-Racing 4-piston calipers incl. screws, matching brake pads front and rear and braided-steel brake-pipes!
Weight comparison:AP-Racing brake disc (308 mm diameter) with caliper, brake pads and mounting parts -8,9 kgKo-Bra4 brake disc (315 mm diameter) with caliper, brake pads and mounting parts -9,1 kgStandard Elise / Exige MK2 / 111R brake disc (280 mm diameter) with caliper, brake pads and mounting parts -7,95 kg
Plug & play-solution to replace the standard brake discs. Our kit reveals better brake performance for a reasonable price and is much lighter than the original one.The brake discs are ventilated and slotted (295x25mm, Std: 280x25mm) with bolted alloy disc bells. The weight bears 4,75 kg including bells and screws - the OEM discs are scaled at 6,0kg each.The standard brake caliper remains and will be displaced under the use of matching brackets.We deliver a kit with special developed brakepads for the front axle.Attention: The minimum size of the alloy wheel must be 16".You are able to use the original disc-bells. Only the rotor has to be changed. Price per set.An inhouse single TÜV-appoval for street use is possible.Kit contents:2x two-piece brakce discs (rotor+bells)Set of PFC Brake Pads for front axleBrackets for the caliperFitting Screws
Assembly requires technical knowledge!
As a replacement for the original brake disc with alloy brake pot from the "AP Sport Brake Kit" installed on cup 240.255 and 260 Exige, as well as for retrofitting on all other Lotus Elise and Lotus Exige models from 2004 with this brake system.The brake disk is a product of "PFC Performance Friction" and replaced 1:1, the original disc.Dimensions: 308 mm x 25 mmThe brake caliper shown is not included !Price per pair.Motorsportpart - Track use only - NO street use StVO/StVZO!
Replacement Friction Rotors for Kobra-Brake System
Our KoBra-Brake System is equipped with two-piece brake discs (alloy pot + friction rotors)
If the rotors are worn (no slots left or cracks through the outer diameter) you have to replace it.
Here in the article you can get all the available options of replacement rotors. We deliver a set for one axle (1x LH and 1x RH rotor incl. the fitting kit / bobbins. Normally you can continue with the alloy-pot that exists.
The following variants are used:
a) 295mm-Rotors
Use: KoBra 2 with 2pot-Standard-Caliper front for Elise, Exige and 2-Eleven using 4Zyl-Powertrain (incl. Fitting)
b) 308mm-Rotors
Use: Lotus Big Brake Kit with 4Pot-AP-Caliper as a replacemnt for the Standard-Rotor frontfor Elise, Exige and 2-Eleven using 4Zyl-Powertrain (incl. Bobbin-Kit)
c) 313mm-Rotors
Use: KoBra 4 and KoBra 4-2 with Komo-Tec-Caliper front and rear for Elise, Exige and 2-Eleven using 4Zyl-Powertrain (incl. Bobbin-Kit). Attention: Rotors come "dyno-bedded"!
e) 343mm-Rotors FLOATED
Use: KoBra 4-4 FLOATED with 4Pot-AP-Standard-Caliper front and rear for Exige V6 Range and 3-Eleven (incl. Fitting)
f) 362mm-Rotors
Use: KoBra 4 and KoBra 4-4 with 4Pot-AP-Standard-Caliper front for Evora (or Evora 400 rear, incl. Fitting)
g) 378mm-Rotors FLOATED
Use: KoBra 4-4 FLOATED with 4Pot-AP-Standard-Caliper front for Evora 400 Range (incl. Fitting)
Hints:
Please take car of the driving in periode (except 313mm-dyno-bedded) to be sure that everything is running well and to avoid faiding!
Assembly requires technical knowledge!
Original Lotus Fast Road Brake Discs
for Elise and Exige with Toyota Engine and AP-4-Pot-Calipers front.
Drilled Brake Discs with 308mm. Substitute Disc for Fastroad Kit
Very good cold braking behaviour, gentle to the discs, low noise and high thermal stability.PFC01 KoBra Mk2 100°C up to 700°CLong track surface with average coefficient of friction. About the temperature slightly increasing friction.Soft response, low wear of pad and disc.Only for KoBra 4-2 BrakesystemMotorsportpart - Track use only - NO street use StVO/StVZO!
Very good cold braking behaviour, gentle to the discs, low noise and high thermal stability.PFC08 100°C up to 700°CLong track surface with average coefficient of friction. About the temperature slightly increasing friction.Soft response, low wear of pad and disc.Not for front axleAP-4-Pot/308mm brake disc & not for Mk1 MMC-Brakesystem!Motorsportpart - Track use only - NO street use StVO/StVZO!
Ferodo Brake Pads
Optimal brake pads for road use by your Lotus.DS2500 (H) 100°C up to 500°CPad compound with average coefficient of friction. Flat friction coefficient course.Fading stability up to 500 °C. The ideal pad for track days and light vehicles.Low wear of pads and discs.
Front axle for Standard-2-Pot-Caliper (not for AP-4-Pot/308mm brake disc & not for Mk1 MMC-Brakesystem!) and rear axle for Standard-Brembo-Caliper!
Motorsportpart - Track use only - NO street use StVO/StVZO!
Ferodo Brake Pads
Optimal brake pads for road use by your Lotus.
DS Performance (FDS) 100°C up to 500°CSports brake pad with an average coefficient of friction. Improved road surface with good fading properties.
Front axle for Standard-2-Pot-Caliper (not for AP-4-Pot/308mm brake disc & not for Mk1 MMC-Brakesystem!) and rear axle for Standard-Brembo-Caliper!
Very good cold braking behaviour, gentle to the discs, low noise and high thermal stability.ZRATED 100°C up to 600°CRacing brake pads medium friction coefficient, Ferodo DS2500 similar, ideal for road use in terms of wear and braking.Only for KoBra 4-2 BrakesystemMotorsportpart - Track use only - NO street use StVO/StVZO!
Stock Brake Pads
for Lotus Elise & Exige 4Zyl. models
Attention! Front axle for Standard-2-Pot-Caliper (not for AP-4-Pot/308mm brake disc & not for Mk1 MMC-Brakesystem!)
Ferodo Brake Pads
Optimal brake pads for road use by your Lotus.DS Performance (FDS) 100°C up to 500°CSports brake pad with an average coefficient of friction. Improved road surface with good fading properties.
Only for Front axle AP-4-Pot/308mm brake disc!
Ferodo Brake Pads
Optimal brake pads for road use by your Lotus.DS 2500 (H) 100°C up to 500°CPad compound with average coefficient of friction. Flat friction coefficient course.
Fading stability up to 500 °C. The ideal pad for track days and light vehicles.
Low wear of pads and discs.
Only for Front axle AP-4-Pot/308mm brake disc!Motorsportpart - Track use only - NO street use StVO/StVZO!
Sport brake pads PAGID front axle
RS4-2 Blue 100°C to 500°C:
All-round lining with medium friction coefficient and excellent modulation. Very good cold performance, short bedding-in phase. Fade-resistant up to over 500°C, momentarily withstands up to 750°C. Also suitable as a rear axle lining when paired with a higher friction coefficient on the front axle.
Very good cold braking behaviour, gentle to the discs, low noise and high thermal stability.PFC01 100°C up to 700°CRacing pad with allround characteristics and a medium to high coefficient of friction overentire temperature range, about 15% higher coefficient of friction than PFC97. Good first bite.Good Modulation.Only for front axleAP-4-Pot/308mm brake disc!Motorsportpart - Track use only - NO street use StVO/StVZO!
PFC-665 High Performance Brake FluidDOT4 up to 330°C for excellent high temperature performance to resist brake fade due to vapour lock. Outstanding corrosion resistance and class leading lubricity to prolong system life and enhance ABS operation.Price per bottle = 500ml (you will need ca. 1,5l for fluid-change!).
€29.50*
This website uses cookies to ensure the best experience possible. More information...
