Phase EX4-530 Mehrleistung bis zu +142 PS/+130 Nm Exige S V6-Range
Product information "Phase EX4-530 power up to +142 hp/+130 Nm Exige S V6-Range"
Performance phase EX4-530
- Performance data EX4-530: approx. 532 hp / 570 Nm
- Performance data standard: approx. 390-436 hp / 420-440 Nm (factory specifications vary depending on model)
Finally, we can offer our new 500+ power levels. In order to develop a perfect solution, it took the necessary time and a test phase of 2 years to finally be able to conclude with the use of our new Emu Pro16 control unit. The aim was not simply to call up ever higher performance data, but to completely redefine the concept in terms of stability and reliability and to complete it in peace, including the necessary test phase.
Contrary to the widely used method of simply generating additional power through increased boost pressure, Komo-Tec focuses on an increase in performance by optimizing the conditions of the overall system while minimizing mechanical and thermal stress. After extensive calculations, CFD flow simulations, various prototypes and numerous hours on the dynamometer, we were now able to produce a steadfast 530+ hp. After lengthy testing, we decided to continue using the Lotus factory-installed Edelbrock 1740 supercharger on the Exige 4xx models and optimize it to make it viable for the targeted performance. In order to ensure stability in the 500+ hp class, pistons, connecting rods and other relevant engine components are exchanged for those tested in racing.
The biggest difference to our previous EX kits is the change to the new, technically substantially advanced, freely programmable control unit "Emu Pro16". All standard functions of the vehicle can be retained and taken over (ABS/ESP, TC, Cruise Control...). The OBD functions are also fully functional. The use of two broadband lambda sensors guarantees perfect mixture preparation. After intensive development on the ECU and the associated coordination work, we can say that the suitability for everyday use is now on an absolute OEM level.
This ECU has also been successfully used in the Lotus Cup Europe and the experience we have gained there with our racing cars has also found its way into the further development of our conversions.
The EX4-530 phase is thus the first generation of a total of 3 power levels, which will reach up to 590hp in the future.
Key Benefits:
- significantly more torque (up to +130 Nm) and power (up to +142 hp) compared to the standard vehicle (based on the Exige 390)
Performance phase EX4-530 consisting of:
- KT500+ Carbon Airbox System with K&N Sport Air Filter
- KT-forged piston Wiseco with improved design
- KT-Stahl forged connecting rods "X-beam" design from racing
- KT-connecting Rod Bearing Set
- ARP Cylinder Head Stud Bolt Set
- Reinforced valve springs with titanium spring plates
- Optimization of the belt drive
- Modified pulley
- KT-stainless steel manifold with optimized tube lengths type EX500+
- KT-stainless Steel Trouser Tube
- 200-cell sports catalytic converter HJS (main catalytic converter) Euro6 compliant
- Lambda Sensor Cable Extension
- Removal and installation of motor
- Complete assembly of the engine incl., weighing of the piston connecting rod units, reworking of the main bearing lane
- Retracting the engine
- ECUmaster EMU Pro16 ECU with KT Plug & Play Adapter
- Individual tuning of the EX530 control unit (ignition, injection maps and camshaft phase adjustment)
Also included in the price are the assembly, as well as a test bench run with performance report.
Suitable for: Exige Sport 390, Sport 410, Sport 420, Cup 430 (as well as associated Cup models)
WARNING: Kit requires the use of at least (or high-quality) Super Plus fuel (ROZ98).
Motorsport kit - Not street legal! Not permitted in the area of the StVO/StVZO!